09 April, 2013

It's Row Time!

Well, OK, not quite yet. But the bottom should be re-glassed by the end of the month. I'm making arrangements to get the raft and it's trailer back downstate and listed for sale. I've just decided that for a recreational fisherman with a day job and a ton of other competing hobbies, owning two boats is pretty ridiculous.


This would be the "before" picture...

For those new to the blog, it's a 2009 Clackacraft 16LP. It's got some fishing mojo, as it's last owner was Mike Schultz of Schultz Outfitters (and a bunch of other places before that). If you can fly fish for it in the Midwest, it's been caught from this boat. Mike's a good friend and I'm proud to be the next owner of his boat.

The new boat came with some great advice from guides and drift-boat owning buddies. Some highlights include:
  • "Dude - now you'll never fish. But your Dad will love this!"
  • Buy some good oars - later. Learn to row on the beaters first. But after that a good set of sticks will make your life SO much easier.
  • A drift boat is like a sheet of plywood. It'll never plane and a higher horsepower motor will only cost you a bunch more, burn more gas, and be heavier to lift on and off. 3-4hp will do you just fine.
  • If you can't row, you can't go. I'm even applying this one to Dad. The wife might get a free pass. I suppose the dog will, too.
  • Point at danger and backrow.
All seems solid. I've got lots to learn. But I'm already plotting floats to take and places I'll explore. Thus opens a new chapter as a fisherman. I can't wait.

-Sean-

07 April, 2013

Initial Product Review - Shimano Ultegra Clipless Pedal System

EMBARASSING CONFESSION #1: For some reason, I was never a Shimano guy. Kind of like how some folks hate Microsoft. I think it stems from my early days racing BMX as a kid - you were either Suntour or Shimano. I was the former, or at least until I got hooked on high-end one-off tricked out gear. Anyway, we've made our piece. I love my new Ultegra 6700 grouppo.

After upgrading the wheels, drivetrain, shifters, crankset, and saddle, my Olde Schoole Look PP206 clipless pedals were looking decidedly uncool. And, we can't have uncool.

When I headed to the shop, I was in search of Speedplay. Those trick-looking lollipops that you can't clip into the wrong side seemed like just the ticket. But a quick discussion with the knowledgeable shop dude suggested otherwise. Evidently Speedplays have a reputation for being hard to clip in and out of. If you've ridden with me, you know I'm a touch paranoid about that. I clip out pretty early. Falling on asphalt mixed with gravel SUUUUUUCCCCKKKKS.

Because I was replacing Looks, somehow spending a bunch more money to buy another pair of Looks seemed weird. Which led me to the Shimano SPD family. As mentioned earlier, I have had a built-in bias against Shimano. But, damn, I do love the new Ultegra set-up. And my 105 hubs. So, I start looking at the Shimano 105 and Ultegra pedals.

EMBARASSING CONFESSION #2: You know I bought the more expensive Ultegras. And you know why. Yeah, it's because they'd match the rest of the set-up. Fine, you're better than me. I'm over it.

Cool - so how'd they ride?

It was an interesting transition at first. The Look's had a much longer engagement "stroke". You could tell you were on them and they were clicking in, even if it took a while. The Shimano's were much more "wham, bam, thank you m'am". While I didn't get the immediate feedback, if your foot's in the right place, you're in. Quick. Simple. And with a polite "click".

Clipping out was similar. Didn't really require much thought, but also didn't provide much feedback. Twist - and you're OUT. At first, this was a bit weird. But after a few miles, the Ultegra's feel an immense improvement over their predecessors. The Ultegra clipless system is clearly a number of levels better than the old Looks. Crisp and refined.

The unexpected bonus was the larger platform. I've had some issues with hot spots and numbness in recent years. I was hoping that a different platform might help. And, so far, it has.

More to come as I get a few more miles on these, but early impressions are very solid. Quite happy with my purchase.

-Sean-

02 April, 2013

The Fizik Factor

During last year's professional fit my uber-squishy Serfas RX saddle was the first thing to go. All that gel and padding had me just floating and moving my hips oddly. It was replaced by a Fizik Alliante VS. If you've never had a look at one, these saddles are both gorgeous and incredibly well-designed. The bike just looks faster with this saddle. It took me a bit to adapt - going from heavily padded to a board - but now I love it. Comfortable for the distance and smooths out my pedal stroke.

But wait...

So when I'm dropping my bike off at Aberdeen Cycle & Outdoors, Josh says, "Oh, cool - you can put the Fizik seat bag on this". Wait a minute - the WHAT? So, it turns out all Fizik saddles have an integrated clip system that enables you to attach their Saddle Pa:k seat bag without any external brackets or straps. My Topeak saddle bag is fine -- a bit too large and requires a mount at the top as well as a Velcro strap around the seat post. This last strap is a pain as I have to remove the bag to put the bike into my Park workstand. Not the end of the world, but a nuisance.

The best part about the Saddle Pa:k? I can score a brand new one for 20 bucks on eBay -- including shipping! Sweet.


My bag arrived yesterday, so I was understandably eager to install last night. Funny, it took me longer to take the Topeak bag off than to install the new Fizik! I'm very happy with the results. It looks sleek and integrated, rather than tacked on. And the smaller size is perfect for a spare tube, multi-tool, a house key, and a $20 bill! A great product from a pretty cool company.

-Sean-

01 April, 2013

New(ish) Ride; First Impressions

It all started with a lowly 2005 (I think) Giant OCR3 road bike purchased from Great Lakes Cycling and Fitness. I was looking to get back into riding and mine was last year's model at a great price. Lots of upgrades since then, though the major one was having Steve Sauter at Great Lakes build me some lightweight, durable wheels.

But this year, the upgrading got serious. I scored a great deal on a gently-used Shimano Ultregra grouppo from a friend. The folks at Aberdeen Bikes & Outdoors in Chelsea did the build-up. Super cool shop -- my new local favorite. Cool people, nice selection, and no 'tude.

So, what's the finished product like - in a word UNF*CKINGREAL! Got out for my first ride of the season with buddy Josh on Saturday. Shifting was now super-crisp and predictable. I'm not sure how much weight I shaved with the new components but the reduction was VERY apparent. More "spring" and "jump" - with the ability to accelerate at an incredible pace. The Ultegra levers were especially wonderful as they put me in a very nice riding position and fit the hands really well.

But hands-down the best part is the new Ultegra double crankset. I hated the original FSA triple and it's evil companion the Shimano Sora front derailleur. Unless you're a hardcore touring afficianado, triples BLOW! Mine was heavy, shifted like crap, and generally frustrated me. But no longer - the Ultegra drivetrain rocks the house. Smooth, stiff, and the shifting is perfect. I think this upgrade is likely the biggest improvement, but time will tell.

So, here's the run-down on this beast as it stands now - I think I'm done with upgrades, but you never know:

Frame/fork: Giant OCR aluminum frame with carbon fiber fork
Drivetrain: Shimano Ultegra 6700 crankset, front and rear derailleurs, 10-speed rear cog, chain, Ultegra pedals, and Dura Ace super-smooth cables
Cockpit: Bontrager aero bars, Bontrager 100mm stem, Fizik bar tape, Shimano Ultegra levers
Saddle: Fizik Alliante VS, stock seatpost (amazingly...)
Wheels: Shimano 105 hubs and skewers, DT Swiss spokes, Mavic (I think) rims, Michelin Krylion Carbon tires in 23mm
Computer: Garmin Edge 305 with heart rate and speed/cadence sensor

And, a few pictures finish the story.

Trusty new steed on Huron River Dr. - my fave!

Shimano Ultegra drivetrain -- even the pedals!


Command Central.


Fizkik saddle and I took a while to make friends.

From a lowly recreational bike to a performer!

29 March, 2013

A Change is in the Wind

Though we've had the mercury crack 60 a time or two this season, you just knew it wasn't a true indicator of Spring. Here in Michigan, you're not safe until you're past St. Patty's Day. In parts of our State, even that wasn't true - some areas saw 20" of snow over just a few days the week after.

But today is different...

Everyone's just a bit more jovial. And the sun feels like the promise of Summer. I was talking to a fishing buddy on the phone this morning and we both remarked how we were ready to chase some smallies and strip streamers for monster trout. Nevermind that we're actually in the thick of the Spring steelhead run.

Me, I'm ready -- or well on my way. My road bike's gotten an awesome component upgrade with a full Shimano Integra set-up. My drift boat's Up North getting a fresh bottom treatment. And my skis are dried and stowed for the season.

Today just feels like a portent of the beautiful Michigan summer I hope is coming. I'm ready for that first 90 degree bike ride (WTF, why do I like a ride on a hot day so much?). And for the familiar tug of a nice smallmouth on a Huron river evening. Getting in a few miles on the mountain bike trails up at Island Lakes with Project Singlespeed. Or a pleasant afternoon on a sporting clays course. And, of course, for another of my favorite outdoor activities - Detroit Tigers baseball!

It's coming. Are YOU ready?

-Sean-

28 March, 2013

Product Review: Oakley Canopy Goggles

Being a skier who requires corrective lenses is a pain in a$$. I used to just ski in contacts. That worked out just fine, but eventually I decided the hassles and discomfort just weren't worth it. I've tried skiing with just sunglasses and found that without some eye protection my eyes just teared up too much for any visibility.

And over-the-glasses (OTG) goggles are godawful. Only about three models available. Almost no lens choices. And ugly as hell. Sweet. Some great options there.

Enter my longstanding fave - Oakley.

These guys just make the sweetest gear. Totally stylish. Wonderfully functional. I've got a ton of Oakley stuff and it's all da' bomb. Last Fall, I'm reading some pre-season ski porn when I spy the new Oakley Catapault snow goggle. Hmmm, those are pretty mammoth -- bet they'd fit over my glasses. A visit to the local ski shop proves this true. But the price -- ugh -- $160. Ouch. Turns out they've got a price with a little defect in the lens for half price. Score!!!!!

Mine are the Tanner Hall Signature model. Badass graphics, super-cool Fire Iridium lens. These are a truly stylish goggle.

Now that I've got a half dozen days in with them, I have to say I'm pretty pleased. Typically awesome Oakley optics, decent interface with the helmet, and no fogging issues. The frames are a touch large and press down on my cheeks, but this is inherent in OTG goggles, I think.

I love the look of the Iridium Fire lens, but when it's dumping  an inch an hour at Vail, they were pretty dark. Same for Sunday's flat Michigan light. Fortunately, on my last day in Vail, I scored High Intensity Persimmon lens -- much better. Herein lies my only criticism of these goggles. Lens changeout is a PAIN IN THE ASS. My hope is that it will get easier with time. The folks at Smith have it figured out. Oakley needs to follow suit.

Oh, and one last thing. You do look a bit like a bug in these bad boys. Check it below...

25 March, 2013

Product Review: Volkl RTM 84 Ski

Volkl RTM 84
As mentioned previously, I scored a solid deal on a pair of Volkl RTM 84's. Thanks to some nice storm action in NW lower Michigan, I was able to get out for a day yesterday. I'd expected a mushy, slushy Michigan Spring day that wouldn't tell me much. To my surprise cooler temps, cloud cover, and 17"of new snow in a few days, I got to find out more about my the skills of my new boards.

Any outing on a new ski is always interesting. The first couple of runs are always chaos. I usually find it takes me a half day to settle down and figure them out. But these bad boys didn't take long.

But first a few words on why I needed new skis. OK, maybe not needed...

In recent years the trend toward rockered skis has been described as a revolution. Starting with Shane McConkey's Volant Spatula, rocker was quickly found to be more than just a trick to float powder boards. Today you're seeing rocker in nearly every ski from beginner to expert models. This has had me thinking maybe an all-around ski upgrade was in my future for my K2 Public Enemies.

On a recent trip to Colorado, my buddy Dan is skiing a pair of the Volkl RTM 80's and raving about their performance in nearly every condition. After the fact, I discover that another friend has been on a pair of the same skis for a little over a year now and feels the same about his.

What I'm looking for is an all-mountain ski that I can use most of the time in Michigan and take out West for an annual trip. It should do a reasonable job on Michigan hard-pack (be honest -- nothing short of a full-on race ski handles ice and I'm just to old for that shit). It should also handle crud, and be able to make the occasional venture into some powder - I've got my Line Prophet 100's for the truly deep. I won't ski bumps anymore, so that's not an issue. And I'm finding that what I truly enjoy is high-speed cruising with long, swooping GS-type turns. I want speed, smoothness, and easy turn initiation.

I got all that. And more. By mid-day, I'm rocketing down the steepest things I can find, linking effortless turns. Smooth, fluid, and completely in control. This is really something I was looking for in a ski -- the ability to ski fast without thinking about it. The Volkl RTM's deliver this and more. I opted for the wider 84 both because I was looking for a wider ski (personal preference) and because I thought this would give me some advantages in fresh snow. I was a bit concerned I might sacrifice some manueverability, but that doesn't seem to be the case. The titanium in the ski seems to really help it hold a solid, chatter-free edge, even on boilerplate.

While gathering my thoughts about these skis, I thougth I should really say something about the integrated Marker iPT WideRide 12 bindings. So, ummm, they're pretty. And, uh, they're integrated. Seriously, over the years I've owned a lot of the "hot" bindings of the day - Marker MRR "turntables", Look's, Salomon 747 Equipe's, Tyrolia 390RD's - and they're well all just fine. I've really never found much that made a binding either exceptional or poor for me. Are they easy to click into on the hill after a yard sale? Do they stay on when I want them to and release when I don't? Cool. I'm good. These Marker's do what they should, and look cool doing it. 'nuf said.

I'm looking forward to many more days ripping up the mountains of the West and the molehills of Michigan on these sweet boards. Highly recommended.

-Sean-